arturia microbrute manuals.

today i learned the microbrute has various settings controlled via CC values. this is all hidden in the 

ARTURIA MICROBRUTE CONNECTION USER MANUAL.

now somewhat weirdly there is no evidence this file even exists on the official site and i've only come across it here

https://www.manualslib.com/manual/1172383/Arturia-Microbrute-Connection.html

also found the Oscillator Calibration document (if you ever wondered what the two microscrews are at the back of the unit?!) AND the Board Schematics here

https://www.synthxl.com/arturia-microbrute/

for ease of access, here is the list of Parameters available through CC

Parameter	Midi CC #	Value
Receive Channel	102	1 to 16, 17=All
Send Channel	103	1 to 16
Seq Retrig	104	0 to 41 = Reset. 42 to 83 = Legato. 84 to 127 = None.
Seq Play Mode	105	0 to 63 = Hold. 64 to 127 = Note On.
Next Seq Mode	106	0 to 41 = End. 42 to 83 = Instant Reset. 84 to 127 = Instant Continuous.
Seq Step Size	107	0 to 29 = ¼. 30 to 59 = 1/8. 60 to 89 = 1/16. 90 to 127 = 1/32.
Sync Source	108	0 to 41 = Auto. 42 to 83 = Int. 84 to 127 = Ext.
Env Legato Mode	109	0 to 63 = Off. 64 to 127 = On.
LFO Retrig Mode	110	0 to 63 = Off. 64 to 127 = On.
Note Priority	111	0 to 41 = Last. 42 to 83 = Low, 84 to 127 = High.
Velocity Curve	112	0 to 41 = Lin. 42 to 83 = Log. 84 to 127 = Anti Log.
Gate Length	113	0 to 41 = Short. 42 to 83 = Med. 84 to 127 = Long
Seq Step/Gate Mode	114	0 to 63 = Clk. 64 to 127 = Gate/Tap.
Pitch Bend Range	RPN 06	1 to 12
Local ON/OFF	122	0 = or 127

as a bonus, i also discovered the minibrute has similar parameter modification capabilities as documented in the MiniBrute Connection software editor manual ..
https://dl.arturia.net/products/minibrute/manual/MINIBRUTE_CONNECTION_Manual_EN.pdf

roland gaia sh01 sound designer software

 Roland Gaia

Sound Designer Pack. this handy post includes links to a huge grab bag of stuff - including all ze drivers.

https://forums.rolandclan.com/viewtopic.php?p=327289#p327289

as it mentions, the full set of drivers is still available from Roland

https://www.roland.com/us/support/by_product/gaia_sh-01/updates_drivers/

..

the macOS installer is also available further in that thread 

https://forums.rolandclan.com/viewtopic.php?p=330079#p330079

i made a single attempt at installing the sound designer on macOS 13 with no success. 

met with error "the installer could not install the software because there was no software to install"

after some consideration i  will probably try it  on windows rather  than work this issue out.

..

this java GAIA tool seems very handy, but i am currently after something to mess with system settings so i am hoping the above does what i hope.

http://www.grauw.nl/projects/gaia-tool/

novation ZeRO SL MkII ROW SELECT

NOVATION ZERO SL MKII ROW SELECT BUTTONS DO NOT EXIST

There are multiple instances of the manual referring to the Row Select buttons, however these do not exist!!

Holding down [preview] then allows you to use the lower double row of buttons for the same effect.

--
"You can toggle the display format of the CC Num setting between decimal and hexadecimal by pressing the ROW-SELECT button for the upper left-hand row of buttons."

[preview]+[any of the upper double row buttons]

--

Template Grouping - "To step through templates within a group press any of the row select buttons multiple times."

[preview]+[any of the double row buttons] - slightly inconsistent behaviour, the first press does not cycle, but the second does. however after release only one press is required :?

BOSS SP-505 SmartMedia Card

i had an issue with my card, the sp-505 was not displaying the card option under the system menu.

this gave me 2 questions

1. is the card option only displayed when a card is detected? answer. yes.
2. is it a formatting issue and can i format it on PC? answer. no and i dont know.

i managed to dig up an old PC card reader and succesfully read the card.

before i tried PC formatting, i weirdly discovered that i had inserted the card upside down .. turning it up the correct way answered my 1st question. (i must admit to assuming that because the card was inserted fully it was the correct way up).

i formatted the card in the SP-505, and it's Fat12 (reported by lubuntu).

there is no simple right click to format to Fat12, formatting to Fat under win10 results in being unreadable by the SP-505.

at this point i can't be bothered working out how to format using PC. maybe later.

default DNS settings Archer vr1600v v1.0

 Advanced > Network > DSL

edit whichever is connected.

click on advanced to reveal DNS settings