arturia microbrute manuals.

today i learned the microbrute has various settings controlled via CC values. this is all hidden in the 

ARTURIA MICROBRUTE CONNECTION USER MANUAL.

now somewhat weirdly there is no evidence this file even exists on the official site and i've only come across it here

https://www.manualslib.com/manual/1172383/Arturia-Microbrute-Connection.html

also found the Oscillator Calibration document (if you ever wondered what the two microscrews are at the back of the unit?!) AND the Board Schematics here

https://www.synthxl.com/arturia-microbrute/

for ease of access, here is the list of Parameters available through CC

Parameter	Midi CC #	Value
Receive Channel	102	1 to 16, 17=All
Send Channel	103	1 to 16
Seq Retrig	104	0 to 41 = Reset. 42 to 83 = Legato. 84 to 127 = None.
Seq Play Mode	105	0 to 63 = Hold. 64 to 127 = Note On.
Next Seq Mode	106	0 to 41 = End. 42 to 83 = Instant Reset. 84 to 127 = Instant Continuous.
Seq Step Size	107	0 to 29 = ¼. 30 to 59 = 1/8. 60 to 89 = 1/16. 90 to 127 = 1/32.
Sync Source	108	0 to 41 = Auto. 42 to 83 = Int. 84 to 127 = Ext.
Env Legato Mode	109	0 to 63 = Off. 64 to 127 = On.
LFO Retrig Mode	110	0 to 63 = Off. 64 to 127 = On.
Note Priority	111	0 to 41 = Last. 42 to 83 = Low, 84 to 127 = High.
Velocity Curve	112	0 to 41 = Lin. 42 to 83 = Log. 84 to 127 = Anti Log.
Gate Length	113	0 to 41 = Short. 42 to 83 = Med. 84 to 127 = Long
Seq Step/Gate Mode	114	0 to 63 = Clk. 64 to 127 = Gate/Tap.
Pitch Bend Range	RPN 06	1 to 12
Local ON/OFF	122	0 = or 127

as a bonus, i also discovered the minibrute has similar parameter modification capabilities as documented in the MiniBrute Connection software editor manual ..
https://dl.arturia.net/products/minibrute/manual/MINIBRUTE_CONNECTION_Manual_EN.pdf